Guang Zhou Sunland New Energy Technology Co., Ltd.

Guang Zhou Sunland New Energy Technology Co., Ltd. Your Personal Battery Expert! sales@tacbattery.com Mobile : 15813319221

Manufacturer from China
Verified Supplier
13 Years
Home / Products / Polymer Lithium Ion Batteries /

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

Ask Latest Price
Brand Name :TAC BATTERY
Model Number :13200MAH 3.7V
Certification :ROHS \ CE
Place of Origin :guangzhou
MOQ :500pcs
Price :USD 23
Supply Ability :100000 per month
Delivery Time :20-30 days for pack
Packaging Details :20 pack in one plastic tray, 10 tray in each carton
material :polymer lithium
voltage :3.7v
capacity for pack :13200mah
capacity for cell :4300mah
accemble :4s1p
connector :5 pin molex 51146. //// Cable 150mm length
circle life :500 times
warranty :1 year
size :less than 200mm x 110mm x. 80mm
Contact Now

Add to Cart

Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
View Product Description

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

Base information

item data remark
1 16000mah standard capacity
2 15500mah Min capacity
3 3.7v voltage
4 4.2±0.03V 100% full charge
5 0.5c charge current
6 0.5c dishcharge current
7 5 pin molex 51146. connector
8 peak current 2A
9 continue current 1.5A

Other specification for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

Number

Item

General data

Remark

1

Internal Impedance

≤80mΩ

The measure must uses the new batteries that within one week after shipment and cycles less than 5 times test by internal resistance measured at AC 1KHZ after 50% charge

2

Standard charge

Constant Current 0.5C5A

Constant Voltage 4.2V

0.01 C5A cut-off

Charge time about 4.0h

3

Standard discharge

Constant current 0.2 C5A

end voltage 3.0V

4

Fast charge

(

Constant Current 1C5A

Constant Voltage 4.2V

0.01 C5A cut-off

Charge time about 2.5h

Initial Performance Test For Cell

Item

Test Method and Condition

Requirements

Open-Circuit

Voltage

The open-circuit voltage shall be measured within 24 hours after standard charge.

≥4.08V

Internal impedance

Internal resistance measured at AC 1KHz after 50% charge.

≤80mΩ

Minimal Rated

Capacity

The capacity on 0.2C5A discharge till the voltage tapered to 3.0V shall be measured after rested for 30min then finish standard charge.

Discharge Capacity

≥4000mAh

Mechanical characteristics and Safety Test witl UN38.3 Standard

1 / Vibration Test :

After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz, the excursion of the vibration is 1.6mm. The cell shall be vibrated for 30 minutes per axis of XYZ axes.

pass standard: No explosion,No fire

2 / Drop Test

The cell is to be dropped from a height of 1 meter twice onto concrete ground.

pass standard: No explosion,No fire

3 / Crush Test

Fresh,Fully charged

Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.

pass standard: No explosion,No fire

4 / Short Circuit Test (20±2℃ ).

samples require: Fresh,Fully charged

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ).

pass standard: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

5 / Short Circuit(60±2℃ ) test

samples require: Fresh, Fully charged

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ).

pass standard: No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃

6 / Impact test

samples require: Fresh,Fully charged

A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample.

pass standard:No explosion, No fire

7 / Forced Discharge test

samples require: Fresh,Fully charged

Discharge at a current of 1 C5A for 2.5h.

pass standard:No explosion, No fire

8 / Nail Pricking test

samples require: Fresh,Fully charged

Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.

pass standard:No explosion, No fire

Drawing for 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

T

Max.08.0

W

50.5+0.5 –0.5

H

110+0.5 –0.5

UNIT

mm

Product Photos

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

China 4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C for sale

4s Lipo Battery For Table PC 16000Mah 3,7V Charge And Discharge 0.5C

Inquiry Cart 0