
Add to Cart
a. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
b. Long life-cycle: Can be circularly used, best can up to 2000 times recycles, 8 times of Lead acid battery.
c. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
d. Good performance at high temperature and high temperature resistance
e. Low self-discharge rate, less than 3% monthly.
f. No memory effects and highly efficient charge.
g. Environment friendly: Clean and Green energy poses no pollution on our environment.
No. | Items | Specifications |
1 | Charge cut-off voltage | 3.65V |
2 | Nominal voltage | 3.2V |
3 | Minimal capacity | 2300mAh @ 1C Discharge |
4 | Nominal capacity | 2350mAh @ 1C Discharge |
5 | Charge current | 1C |
6 | Standard charging method | 1C CC (constant current) charge to 3.65V, then CV (constant voltage 3.65V) charge till charge current decline to £ 0.05C |
7 | Charging time | Standard charge: 2.0 hours Ref |
8 | Max. charge current | 5C |
9 | Max. continue discharge current | 20C (Cell skin temperature cannot exceed 80°C) |
10 | Discharge cut-off voltage | 2.0V |
11 | Operating temperature | Charging: -10°C ~ 45°C Discharging: -20°C ~ 60°C (Cell skin temperature cannot exceed 80°C) |
12 | Storage temperature/humidity | Temperature -10°C ~ +35°C Humidity 65%±20%RH (Recommended to store 23 ± 5°C for long term storage) |
13 | Cell Weight | 78.0g±1.0g |
14 | Cell Dimension | Length: 65.0±0.3 mm Width: 26.2±0.2 mm |
Application :
this is specially design for high power use for E-Bike power tool etc
Pictures:
Power Type LiFePo4 IFR26650 2300mAh 3.2V For Power Tool