CE FCC ROHS PSE Mini multi-function jump starter 6000mAh Miniboost Jump Starter
Quick Detail:
| Place of Origin: | China | Brand Name: | TAC | Model Number: | EC0025 |
| Capacity: | 6000mAh | Cell type: | High-power Type Lithium-ion |
| Input: | 5V/2A DC | Output； | 5V/2A DC | Output Port: | 12V/200-300A(Peak Current) |
| Dimension: | 139*78*17mm | Weight: | 230g | Warranty: | One Year |
| Features: 1. Charge battery with a capacity of 6000mAh 2. Charge battery with a capacity of 5400mAh 3. Fully charge a smartphone and similar 4. Can be interfaced with most mobile phones and devices with USB 5. Certification: CE FCC ROHS PSE 5. MOQ: 100set |
Packaging & Delivery:
| Packaging Detail: | 20pcs/ctn, 11kg/cartons |
| Delivery Detail: | Samples 1-3days; Quantity Order 7-15days |
Mini multi-function jump starter 6000mAh Miniboost Jump Starter Specifiction:
| Products | CE FCC ROHS PSE Mini multi-function jump starter 6000mAh Miniboost Jump Starter |
| Model NO | EC0025 |
| Capacity | 6000mAh |
| Cell type: | High-power Type Lithium-ion |
| Input: | 5V/2A DC |
| Output； | 5V/2A DC |
| Output Port: | 12V/200-300A(Peak Current) |
| Dimension: | 139*78*17mm |
| Weight: | 230g |
| Warranty: | One Year |
A Real Life Saver
Make sure you and loved ones can get home when stranded,this will jump starter your 3.5L gas or 1.4L diesel engine up to 20 times on single charge.
Multifunction Protective Clamp
1.Red clamp to the positive(+) battery terminal and black to the negative(-) terminal. When the LED illuminates green,jump starting of the car is ready.
2. If the clamp is connected properly while the LED does not rurn on, try to remove the car battery, Then connect the clamp to the cr engine nd press the reset button round 3 seconds. Green LED will be on to allow the ignition.
3. When the ignition process hs completed,disconnect the cble nd car jump ste arter. The clamp can be removed unit the greed LED goes out.
Quick Start Guide
1.To ensure a successful jump, clean both battery terminals with brush.
2.Connect the black clamp to the vehicle negative(-) battery terminal and connect the red clmp to the vehicles positive(+) battery terminal.
3.Connect the jump starter cables to the powereed jump stater unit,Tum on the unit 3 lights must be lit to use the jump starter.
4.Starter the vehicle
5.Disconnect the jump starter cables from the powereed jump starter
6.Remove clamps from the vehicles battery.
