24V LiFePO4 battery 18AH for Disinfection Spray
Advantage for 24V LiFePO4 battery 18AH for Disinfection Spray
-
The battery pack was assembled by IFR32700 6AH 3.2V single cell , it is easy to buy from china marketing
-
Various capacity for same size 32700 , you can design it follow your cost limit base on same size
-
Meet different size require through adjust the array for the cell .
-
high level BMS inside to keep safe performance
-
50 set Low MOQ are workable
Specification for 24V LiFePO4 battery 18AH for Disinfection Spray
| No. | Items | Specifications | Remark
|
|
1 | Capacity for assembled cell
discharging by 0.2C
|
≥17.4Ah | Standard discharging method
|
|
2 |
Battery Voltage
|
≥25.6V
| Delivery voltage, Within 10 days from Factory
|
|
3 |
Standard charge condition
| Charge with 0.2C constant current and 28.8Vconstant voltage, charge to 28.8V continue charging till current decline to ≤0.01C
| Charge voltage: 28.8V±0.02V
Charge current:0.2C
|
|
4 | Maximum charge current
|
10A | | For continuous charging mod
|
|
5 | Maximum discharge current
| 15A | | For continuous discharge mod
|
| 6 | Maximum discharging current(time) |
30A | 5S | |
|
7 | Standard discharging method
|
0.2C constant current discharge to 8V, | 0.2C |
|
8 | Internal Impedance
|
Assemblage Impedance
| Measure two sides of the drawing line after assembling.
|
| 9 | Net | 3.8Kg | PACK |
Engineer Drawing
| NO. | Items | 单位Units:mm |
| 1 | Length/长度 | L | MAX 230mm |
| 2 | Width/宽度 | W | MAX 100mm |
| 3 | Thickness/厚度 | H | MAX100 mm |
| 4 | Length of cable/线长 | L1 | 250mm±10mm |
Battery Photos
PCM parameter of Battery Pack
| Item | Content | Criterion |
| | | |
| Voltage | Charging voltage | DC:28.8V CC/CV |
| Balance voltage for single cell | / |
| Current | Balance current for single cell | / |
| Current consumption | ≤50uA |
| Max continues charge current | ≤13.9A |
| Max continues discharge current | ≤15A |
| maximum discharging current(time) | 30A (5S) |
| Over charge Protection
| Over charge detection voltage | 3.65±0.025V |
| Over charge detection delay time | 0.5~1.5S |
| Over charge release voltage | 3.55±0.05V |
| Over discharge protection
| Over discharge detection voltage | 2.30±0.05V |
| Over discharge detection delay time | 500~1500mS |
| Over discharge release voltage | 2.7±0.10V |
| Over current protection
| Over discharge current detection | 50±5A |
| Detection delay time1 | 50~150mS |
| Detection delay time2 | 5~15mS |
| Over charge current detection current | 17±3A |
| Detection delay time | 300~800mS |
| Short protection
| Short Circuit Protection Current | 180A |
| Detection delay time | 450~800uS |
| Detection condition | 1.Exterior short circuit |
| Release condition | Cut load,Auto Recovery
|
| temperature
| Detect the temperature of the Mosfet MOS | / |
| Charging high temperature protection | / |
| Charging low temperature protection | / |
| Discharge high temperature protection | / |
| Discharge low temperature protection | / |
| Temperature protection release condition | Drop to 45℃, charge
下 |
| Operating temperature range | -20~+80℃ |
| Storage temperature range | 0~60℃ |
| | Main loop electrify resistance | ≤10mΩ |
Application
This is customize design for Disinfection Spray, it also can use for Energy storage system or back up
Storage of the Batteries
Low self discharge performance , The batteries should be stored at room temperature, charged to about 30% to 50% of capacity.
We recommend that batteries be charged about once per half a year to prevent over discharge.
More detail pls check below
https://lnkd.in/gMBHqFQ
Major Customer of TAC BATTERY
